How to Get an Electrician License in Utah (2026 Guide)

Utah licenses electricians through the Division of Professional Licensing (DOPL), part of the Department of Commerce, across five classifications: apprentice, journeyman, master, and their residential-scope counterparts. The electrical contracting business itself needs a separate license, the E200 or E201 electrical contractor license, which must be anchored by a licensed master electrician as the qualifier.

This guide covers the apprentice-to-master ladder, the 2025 and 2026 exam changes, and the qualifier rule behind the E200 and E201 contractor license, which is more specific in Utah than in almost any other state.

At a glance

• Journeyman: 576 classroom hours plus 8,000 hours of experience, or 16,000 hours with no classroom program
• Master: 8,000 hours as a journeyman, reduced to 4,000 or 2,000 hours with a qualifying degree
• The E200/E201 electrical contractor license needs a master electrician as DOPL's defined qualifier
• General liability insurance minimums: $1,000,000 per occurrence, $2,000,000 aggregate
• Continuing education: 16 hours every two years, 8 of them on the National Electrical Code

For the rules in every state, see how to get a contractor license in each state. For Utah's broader contractor requirements beyond electrical, see the Utah contractor license guide.

Utah's five electrician classifications

DOPL issues five individual electrician licenses:

• Apprentice electrician, must be licensed before logging hours under a journeyman or master.
• Journeyman electrician, full unlimited-scope electrician.
• Master electrician, the top individual credential; qualifies a general electrical contracting business.
• Residential journeyman electrician, residential-scope journeyman.
• Residential master electrician, residential-scope master; qualifies a residential electrical business.

Notes on the table:

• Master and residential master both allow 2,000 apprentice hours with an EAC/ABET-accredited electrical engineering degree; master alone also allows 4,000 hours with an applied-science associate's degree.
• Every classification also requires passing Prov's written and practical exams.

Above the individual ladder sits the electrical contractor license (E200 general, E201 residential), which is a business license, and that's where the qualifier requirement lives. We'll get there, but it starts with the individual ladder.

Step 1: License as an apprentice

Utah requires apprentice electricians to be licensed before they can legally start logging hours under a journeyman or master. That's a small but important detail: your qualifying experience only counts if you were properly licensed as an apprentice while you earned it. Apprentices work under the supervision of a licensed journeyman or master electrician.

Step 2: Become a journeyman electrician

The journeyman electrician is Utah's full-scope working credential. The hours are in the table above: a four-year, 576-hour apprenticeship program plus 8,000 hours of licensed experience under a journeyman or master, or 16,000 hours with no classroom program.

Residential journeyman follows the same pattern at half the hours: a two-year, 288-hour program plus 4,000 hours of work experience as a licensed apprentice, or 8,000 hours of residential experience with no classroom program.

Utah's 2026 exam structure

Utah updated its electrician exams. As of August 1, 2025, journeyman and residential electricians take a single combined exam covering both Theory and Code (previously two separate exams), plus a practical exam. Exams are administered by Prov, whose candidate bulletin lists the passing standard at 75%.

There's also a 2026 registration change worth knowing. Effective January 19, 2026, all first-time candidates registering for a licensing exam with Prov must submit the Verification of Electrician Experience form directly to Prov, attached electronically to their exam registration. Out-of-state applicants who attended a trade program must also attach official transcripts, and graduates of an approved Utah trade program are placed in a pending status until their school confirms completion to DOPL. Exam formats and requirements are set by DOPL and Prov and change, verify the current details before you register. (This guide covers the licensing process, not exam preparation.)

Step 3: Become a master electrician

The master electrician is Utah's top individual credential and the one that qualifies a full electrical contracting business. The standard path is 8,000 hours of experience as a licensed journeyman electrician. That drops to 4,000 hours with an associate's degree in applied science from an accredited electrical trade program, or 2,000 hours as an apprentice with a bachelor's or master's degree in electrical engineering from an EAC/ABET-accredited program. Every path ends with a passing score on the Prov Master Electrician Law and Rules exam, plus the practical exam unless it was already passed for the journeyman license.

Residential master electrician is the residential-scope equivalent: 4,000 hours as a licensed residential journeyman, or 2,000 apprentice hours with the same electrical engineering degree.

Utah electricians must also complete 16 hours of continuing education every two years (with a minimum of 8 hours on the National Electrical Code), the requirement applies to journeyman, master, residential journeyman, and residential master licenses.

Step 4: The electrical contractor license, and the qualifier requirement

Here's the part that decides whether you can own an electrical company in Utah. Holding a master electrician license lets you do master-level work. But to contract for electrical work, to bid jobs and run an electrical business, the company needs an electrical contractor license from DOPL:

• E200, General Electrical Contractor: authorizes a business to bid and perform general electrical work in Utah.
• E201, Residential Electrical Contractor: authorizes residential-scope electrical work.

(Note the classification codes: DOPL's current contractor application, version v20260930, lists the electrical business classifications as E-200 General Electrical and E-201 Residential Electrical, alongside E-100 General Engineering. Older guides, including earlier versions of this one, refer to "E100/E200" for the electrical pair. Check the classification code on the current application before you file, and confirm with DOPL which classification matches your scope.)

Whichever code applies, the rule behind it is the same, and DOPL's application states it in one line:

"Electrical and plumbing classifications require the qualifier to hold the trade's Master License."

Utah calls this person the qualifier (older materials say "qualifying individual"), the licensed master whose credential the business license stands on. No qualifier, no electrical contractor license. And if your qualifying master leaves, the business license is on a clock. We'll cover that clock below.

On bonding: earlier versions of this guide stated a flat $50,000 bond for the electrical contractor license. DOPL's current contractor application does not state a fixed universal bond amount, it says that "prior to issuing the license, a bond may be required," and directs applicants to Utah Code § 58-55-306 and Utah Admin. Rule R156-55a-602 for bond criteria and amounts. Bond requirements in Utah are conditional rather than flat, so do not budget off a single number, read the statute and rule for your situation, or ask DOPL directly. We have corrected this guide rather than repeat a figure we could not verify against current DOPL materials.

The pre-licensure requirement per the current application is a 25-hour pre-licensure course plus a 5-hour Business and Law Course for general and primary classifications, and general classifications require passing the Utah Contractor Business and Law exam. General liability insurance minimums are $1,000,000 each occurrence and $2,000,000 aggregate, with DOPL listed as certificate holder (Utah Admin. Code R156-55a-302d). Processing fees on the current application run $50 per qualifier and $175 per classification, plus a $1.00 Electronic Reference Library Surcharge. All fees and requirements are set by DOPL and are subject to change, verify before you send payment.

What Utah's rule actually says about the qualifier

This is the part that separates Utah from most states.

Utah Admin. Code R156-55a-304 governs contractor license qualifiers, and it does not leave the relationship to inference:

Hours. The qualifier "shall receive remuneration for work performed for the contractor licensee for not less than 12 hours of work per week." That floor drops only if the total hours worked by all owners and employees is under 50 per week, and even then it cannot fall below 20 percent of the total hours worked by everyone at the company.

Pay, if the qualifier is an owner. Remuneration "may be in the form of owner's profit distributions or dividends with a minimum ownership of 20 percent of the contractor licensee."

Pay, if the qualifier is an officer or manager. "The remuneration shall be in the form of W-2 wages."

DOPL turned that rule into a checkbox. On the Qualifier Affidavit in the current application, under "Select Qualifier's Business Entity Position," there are exactly two options: Owner of at least 20% or W-2 Employee in Management Position. There is no third box.

And DOPL's contracting FAQ states the conclusion outright:

"The only legal way to 'work under' any license is as an officer or W2 employee of a licensed contractor."

DOPL adds that the person giving up the license is liable for aiding and abetting, the person using it for contracting without a license.

One more Utah quirk worth knowing: under R156-55a-304(3), a qualifier may not act as qualifier for more than three licensees at any one time, and going past three requires demonstrating material authority over the businesses to the Commission and the Division plus their written approval. Most states cap this at one, so Utah is unusually accommodating for multi-entity operators, within a hard ceiling.

The full breakdown, including how Utah compares to Alabama, Virginia, Oregon, Indiana, Wisconsin and the rest, is in the Utah contractor license qualifier.

If your qualifying master electrician leaves

Utah gives you two deadlines, and they are short.

Per DOPL's contracting FAQ: both the qualifier and the licensee must notify DOPL in writing within 10 days of the qualifier's last day of employment. The licensee then has 60 days from that date to replace the qualifier. If the written notice is not sent within 10 days and the qualifier is not replaced within 60 days, the license can be revoked.

DOPL also settles the ownership question that comes up in every messy exit: "The license stays with the company; it does not 'belong to' nor does it 'go with' the qualifier."

So your electrical contractor license does not walk out with your master, but it does start a 60-day countdown. If you have exactly one master electrician and no bench, that is a single point of failure. Build the plan before you need it: the contractor qualifier contingency plan.

What if you own the business but aren't the master?

This is the most common bind in Utah electrical contracting: you can run the company, but the license requires a master electrician as the qualifier, and you don't hold that license. Utah leaves you a few legitimate routes:

1. Earn the master license yourself. The cleanest long-term fix, but you're looking at the full journeyman-then-master timeline before you can qualify the business.
2. Employ a licensed master electrician who genuinely serves as the company's qualifier, on one of the two footings the rule allows, 20 percent owner, or W-2 employee in a management position.
3. Never pay for a name on paper. Paying a master electrician to attach their name while they play no real role in the company is a class A misdemeanor in Utah for both parties, and it jeopardizes the license and the business.

The legitimate version of option 2 is a full-time W-2 employee who genuinely QUALIFIES the business the way DOPL's rule describes: either a 20 percent owner, or a W-2 employee in a management position who actually supervises the work. That is what a qualifying agent is. If you need a master electrician to qualify a Utah electrical contractor license, Hire a Qualifying Agent, or read more about contractor qualifier services and how the arrangement works across states.

How a qualifying agent works in Utah

A qualifying agent is a licensed professional your company employs so the business can hold its license under their credential. For a Utah electrical contractor license, that means a licensed master (or residential master) electrician who is a real W-2 employee, not a 1099 contractor and never a percentage-of-jobs deal.

The W-2 distinction is not our opinion. It is the text of R156-55a-304, the only two checkboxes on DOPL's Qualifier Affidavit, and the plain language of DOPL's own FAQ. If you have been told otherwise, read can a qualifying agent be a 1099 contractor.

If you're weighing your options, start here:

• What Is a Qualifying Agent?, the role in plain English.
• The Utah Contractor License Qualifier, Utah's rule in full, and how it compares nationally.
• Electrical Contractor Qualifying Agent: Requirements by State, how the qualifier requirement varies.

If you already hold a Utah master electrician license, companies need exactly what you hold to qualify their business. Become a Qualifying Agent explains that legitimate W-2 role.

The rest of the Utah trades

Utah's other trades run on the same qualifier architecture:

• Plumbing, the P200 and P201 classifications require the qualifier to hold a Utah Master Plumber or Residential Master Plumber license, and Utah publishes two conflicting sets of journeyman hour requirements on its own website. See plumbing license Utah.
• HVAC, Utah replaced the S350 specialty classification with the H100 general classification in 2026, adding a mandatory gas certification and a 4,000-hour recency rule. Utah issues no individual HVAC license at all. See HVAC license Utah.

A note for multi-state electrical businesses: Utah and the NASCLA exam

Utah accepts the NASCLA Accredited Examination for commercial general building contractors, which can streamline general-contractor licensing across participating states. Passing it never removes a state's requirement that a qualifier stand behind the license. We break that down in The NASCLA Exam Explained.

How much does a Utah electrician license cost?

Individual license and Prov exam fees are set by DOPL and the testing vendor and are modest. The electrical contractor license adds the pre-licensure coursework (25 hours plus the 5-hour Business and Law course), the Business and Law exam, general liability insurance at the $1M/$2M minimums, DOPL's $50-per-qualifier and $175-per-classification fees, and any bond required under § 58-55-306 and R156-55a-602. Continuing education (16 hours every two years, 8 on the NEC) is an ongoing cost. All of these are set by DOPL, Prov, or the market, verify current figures before you apply.

What the fee schedule can't answer is what it costs to get a business licensed if you're not the master. That depends on your situation: your own master license, bringing on a qualifier, and the scope of your work. There is no single number that fits most companies.

Frequently asked questions

Does Utah license electricians statewide? Yes. DOPL issues statewide apprentice, journeyman, master, residential journeyman, and residential master electrician licenses, plus the electrical contractor business classifications.

How many hours do I need to become a journeyman electrician in Utah? A four-year (576 classroom hours) apprenticeship plus 8,000 hours of supervised licensed experience, or 16,000 hours of supervised experience in place of the education requirement.

How many hours do I need to become a master electrician in Utah? 8,000 hours as a licensed journeyman electrician. That drops to 4,000 hours with an associate's degree in applied science, or 2,000 apprentice hours with a bachelor's or master's degree in electrical engineering.

What does an electrical contractor license require in Utah? A qualifier who holds the trade's Master License, per DOPL's current contractor application. Add the 25-hour pre-licensure course, the 5-hour Business and Law course, the Utah Contractor Business and Law exam, general liability insurance at $1,000,000 each occurrence / $2,000,000 aggregate, and any bond required under § 58-55-306 and R156-55a-602.

Can I own an electrical company in Utah without a master electrician license? Yes, if a licensed master (or residential master) serves as your company's qualifier. Under R156-55a-304 that person must either own at least 20 percent of the business or be paid W-2 wages as an officer or manager, working at least 12 hours per week. Paying for a name on the license without real involvement is a class A misdemeanor for both parties.

How many companies can one Utah master electrician qualify? Up to three at any one time. Beyond three requires demonstrating material authority over the businesses and obtaining written approval from the Commission and the Division.

What happens if my qualifying master electrician quits? Both of you must notify DOPL in writing within 10 days, and the company has 60 days from that date to replace the qualifier or risk revocation. The license stays with the company.

What changed with Utah's electrician exams? As of August 1, 2025, journeyman and residential electricians take a single combined Theory-and-Code exam, and master electricians take a new Law and Rules exam through Prov. As of January 19, 2026, first-time candidates must submit the Verification of Electrician Experience form directly to Prov, and graduates of approved Utah trade programs are held in pending status until their school confirms completion.

Sources

• DOPL Electrical Licensing, Exam Information, retrieved October 18, 2026
• DOPL Electrical Licensing, retrieved October 18, 2026
• DOPL Residential Journeyman Electrician, Utah Applicants, retrieved October 18, 2026
• DOPL Journeyman Electrician, Utah Applicants, retrieved October 18, 2026
• DOPL Master Electrician, Utah Applicants, retrieved October 18, 2026
• DOPL Contractor Application, All Classifications (v20260930, PDF), retrieved October 18, 2026
• DOPL Contracting, Laws and Rules, retrieved October 18, 2026
• DOPL Contracting, Frequently Asked Questions, retrieved October 18, 2026
• Utah Admin. Code R156-55a-304, Contractor License Qualifiers (Cornell LII reproduction), retrieved October 18, 2026
• Utah Admin. Code R156-55b-302a, Electrician Education and Experience Requirements (Cornell LII reproduction), retrieved October 18, 2026
• Prov Utah Electrical Candidate Information Bulletin, retrieved October 18, 2026

Get help with a Utah electrical contractor license

If you own an electrical company in Utah but don't hold a master license yourself, or your qualifying master electrician is leaving, Hire a Qualifying Agent to find a W-2 master electrician who can stand behind your E200 or E201 license the way DOPL's rule requires. Call 615-219-2110 to talk through your situation, what it costs depends on your classification, your timeline, and whether DOPL's 60-day replacement clock is already running.

Utah's requirements are set by the Division of Professional Licensing and Prov, and fees, exam formats, and rules change, always verify current details with DOPL and the testing vendor before applying. Contractor-side requirements in this guide were re-verified in October 2026 against DOPL's Contractor Application, All Classifications (v20260930), Utah Admin. Code R156-55a-304 and R156-55b-302a, and DOPL's contracting FAQ. This guide explains the licensing process, not exam preparation, and is not legal advice.

Keep reading:

• The Utah Contractor License Qualifier: Two Checkboxes, and Neither Is 1099
• Plumbing License Utah · HVAC License Utah
• Journeyman vs Master Electrician: Key Differences Explained
• How to Get an Electrical Contractor License: State-by-State Guide
• The NASCLA Exam Explained: Every Accredited State
• Utah Contractor Licensing Guide and browse all state guides